Tag Archive | networking

Testing

If there was one thing I could rely on in my last school, it was that no problem was ever down to the infrastructure cabling.

The school’s network cabling had been done in house for years before I started there, and it was there that Bond taught me the fine art of Cat5e. I don’t remember us ever having an infrastructure cabling problem, except for the time it was chewed through by glis glis.

That meant that when I moved to my current school, I immediately decreed we would not be using contractors again any time soon, since I could take care of it and know I was doing a good job. This in turn led to me becoming intimately acquainted with several loft areas of the school over the summer, and more importantly, the purchase of my first Fluke Microscanner kit. At nearly £600, it was an expensive purchase, but worth every penny; I view it as an essential for anyone who takes network cabling even half seriously. If you can’t trust the cabling, you can’t trust the network.

Which is why I have subsequently become infuriated by the fact that the contractors who previously installed network cabling at the school clearly did not have one.

In fact, they did not appear to have a testing tool of any kind. It turns out that I should have decreed that any of our previous cabling contractors who ever showed their faces again on site would be repeatedly stabbed in the eyes with an IDC punchdown tool. I’ve already had to re-terminate patch panels in two separate buildings after discovering that they hadn’t been terminated properly, a fault that not only demonstrates utter incompetence, but is also impossible to miss if you use even a basic continuity tester.

I am the Angry Technician. I am a professional, and take my job seriously. That is why when I install cabling, I GODDAMN TEST IT.